Your subtotal today is $-.--. Tax included and shipping calculated at checkout.
THEY ARE A UNIVERSAL FIT AND MAY NEED TO BE CUT TO FIT YOUR WINDSCREEN!
Cut any additional length from the top and not the bottom
This video below I have found is to be the most helpful with putting it on if you're unfamiliar. You definitely can do this alone, it may seem challenging but I promise you've do harder things every day then put a banner on your windscreen 😅
Clean- Wipe the windscreen
Line it up with some tape if needed, it doesn't matter if it's not perfectly straight. Hint here is to check that your entire Unlucky wording is on the window and not the roof 😅. Run your finger along the banner to feel for the window edge.
To make it even on both sides, I just counted how many wheels there were from the bottom banner edge to the top that meets at the window seal. The black Supra had 5 wheels on both sides so we knew roughly this was even.
Tape it down with two smaller bits of tape on each side against the roof panel. Run your credit card around the window seal over the banner creating a rough indent/outline of the window below. This will help when you need to use the blade.
Start to peel one side and allow the backing to fold under itself. Assure there are no bubbles and press firmly with a scraper or the credit card. And slowly peel and work your way across.
Once completely attached to the window THEN YOU CAN CUT!! More often than not, people won't precut.
The previous indent you marked with your credit card earlier will help you when you blade around the window seal edge.
It doesn't matter how the edge looks even if it is a bit janky and rough. No one is looking that close at it.
Adding product to your cart